{"product_id":"phillo-pendulum-concrete-vibrator-poker-with-counter-spring-model-cv-p","title":"Phillo Pendulum Concrete Vibrator Poker with Counter Spring | Model : CV-P","description":"\u003ch2\u003ePhillo Pendulum Concrete Vibrator Poker with Counter Spring | Model : CV-P\u003c\/h2\u003e\n\u003ch2\u003eFeatures :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCounter spring inside poker head enhance durability to 240 Hours (normal pokers only within 200 hours)\u003c\/li\u003e\n\u003cli\u003eSpecial heat treatment applied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize :\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e28MM 6M\u003c\/li\u003e\n\u003cli\u003e32MM 6M\u003c\/li\u003e\n\u003cli\u003e38MM 6M\u003c\/li\u003e\n\u003cli\u003e38MM 9M\u003c\/li\u003e\n\u003cli\u003e45MM 6M\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e45MM 9M\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e45MM 12M\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e60MM 6M\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e60MM 9M\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrive unit :\n\u003cul\u003e\n\u003cli\u003eA petrol or diesel drive unit with a minimum of 3.7 kW (5 hp) @3000rpm.\u003c\/li\u003e\n\u003cli\u003eAn electric drive unit with a minimum of 1.5 kW (2 hp) or 2.2kW (3hp)\u003cbr\u003e@2800pm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCHECKING STEPS BEFORE USING \u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure that the direction of rotation of the motor is correct (Switch on and face the motor head, make sure motor is counterclockwise rotating; then switch off the motor)\u003c\/li\u003e\n\u003cli\u003eCheck that a petrol or diesel engine is running not over 3,000 r\/min.\u003c\/li\u003e\n\u003cli\u003eCheck loose parts. Tighten all loose parts before operating the unit.\u003c\/li\u003e\n\u003cli\u003eMake sure flexible hose is in good condition. Do not operate vibrator with torn hose\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eOPERATING INSTRUCTIONS\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eInsert hose connector into coupling. Connect the hose connector to the coupling.\u003c\/li\u003e\n\u003cli\u003eTurn on engine\/motor.\u003c\/li\u003e\n\u003cli\u003ePut vibrator into concrete and slowly move vibrator around. Air bubbles and water will rise to concrete surface.\u003c\/li\u003e\n\u003cli\u003eWhen air bubbles and water stop emerging and concrete surface is smooth and level, pullout vibrator and turnoff engine\/motor.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch1\u003eIMPORTANT TIPS\u003c\/h1\u003e\n\u003col\u003e\n\u003cli\u003eDo keep the flexible drive as straight as possible and ensure that it does not twist or knot.\u003c\/li\u003e\n\u003cli\u003eNever engage a poker vibrator drive to an engine that is running. Many accidents happen because of running engine.\u003c\/li\u003e\n\u003cli\u003eWhen vibrating concrete, avoid leaving poker vibrators in the same place for excessive periods.\u003c\/li\u003e\n\u003cli\u003eDuring operation, make sure flexible hose does not bend more than 60 degree. Over bending of hose during operation will increase stress and friction on inner shaft,causing damage to both inner shaft and rubber hose.\u003c\/li\u003e\n\u003cli\u003eWhen finishing concrete vibrating, switch off the motor.\u003c\/li\u003e\n\u003cli\u003eThe vibrator should not be laid on the ground and left running while waiting for the next batch of concrete to avoid overheating bearings inside poker head.\u003c\/li\u003e\n\u003cli\u003eNever leave the vibrator drive hung over scaffolding or such resting places.\u003c\/li\u003e\n\u003cli\u003eDo not drive over the flexible drive.\u003c\/li\u003e\n\u003cli\u003eNever drag the power unit arcund the site by the flexible drive.\u003c\/li\u003e\n\u003cli\u003eNever run the poker vibrator at speeds in excess of 3000 rpm, this will cause to premature failure of the unit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCLEANING AND STORAGE\u003c\/h2\u003e\n\u003cp\u003eVibrators must be handled with care, and be properly maintained in order to avoid unnecessary failure.\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eClean vibrator and drive unit right after every operation. After each cleaning, wipe the vibrator with oil to prevent rusting.\u003c\/li\u003e\n\u003cli\u003eIf concrete vibrator units is to be stored alone (detach from drive unit), wrap hose connector with a plastic bag to prevent dust and water from getting in.\u003c\/li\u003e\n\u003cli\u003eNever stack heavy objects on top of concrete vibrator unit to prevent damage of flexible hose.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003ePREVENTIVE MAINTENANCE\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWe recommend that the poker and drive should be serviced at regular\u003cbr\u003eintervals, every 150 hours. In arduous situation this should be reduced\u003cbr\u003eto every 100 hours.\u003c\/li\u003e\n\u003cli\u003eCheck components are tight regularly.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eASSEMBLY \/ DISMANTLE POKER\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eHold the poker body in a vice. Unscrew the poker nose and the othes parts, taking care not to damage the thread. (left hand thread).\u003c\/li\u003e\n\u003cli\u003eDrive out the bearing and oil seal. Examine bearings and oft seats. inspection reveals that grease of transmission has penetrated into the head, the oil seals need to be replaced.\u003c\/li\u003e\n\u003cli\u003eThoroughly clean all the components ind pay particular ac the bore.\u003c\/li\u003e\n\u003cli\u003eApply the right amount of the Grease (3 # lithium grease) to the bearing.\u003c\/li\u003e\n\u003cli\u003eInstall the bearing and oil seal using the appropriate fit tools. if the bearing is damaged,fit a new bearing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eENSURE THE TAPER AT THE END OF THE ROTOR AND THE BORE OF THE POKER NOSE ARE CLEAN, DRY AND FREE OF ANY LUBRICANT\u003c\/li\u003e\n\u003cli\u003eScrew the nose and the other parts (left-hand thread) into the poker body.It is essential that the nose, bearing housing and body are extremely tight, if dismantled a small amount of thread-locking agent should be used to lock tight.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFLEXIBLE SHAFTDRIVE SERVICING\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWithdraw the inner core ensuring that it does not contact any dirt.\u003c\/li\u003e\n\u003cli\u003eWipe the inner core clean and examine it for any kind of damage and\/or wear. If either is evident then it must be replaced. Examine the outer cover for damage and kinking and replace if necessary.\u003c\/li\u003e\n\u003cli\u003eApply the Grease (3 # lithium grease) sparingly to the inner core so that a fine film remains on its surface. Be particularly careful to leave only the lightest coating within 500mm of the poker end.\u003c\/li\u003e\n\u003cli\u003ePlace the inner core inside the cover.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Aiko","offers":[{"title":"28MM 6M","offer_id":41074189992030,"sku":"CV-P2806","price":97.3,"currency_code":"SGD","in_stock":true},{"title":"32MM 6M","offer_id":41074190024798,"sku":"CV-P3206","price":97.28,"currency_code":"SGD","in_stock":false},{"title":"38MM 6M","offer_id":41074190057566,"sku":"CV-P3806","price":109.0,"currency_code":"SGD","in_stock":true},{"title":"38MM 9M","offer_id":41074190090334,"sku":"CV-P3809","price":131.62,"currency_code":"SGD","in_stock":true},{"title":"45MM 6M","offer_id":41074190123102,"sku":"CV-P4506","price":109.0,"currency_code":"SGD","in_stock":true},{"title":"45MM 9M","offer_id":41074190155870,"sku":"CV-P4509","price":143.06,"currency_code":"SGD","in_stock":true},{"title":"45MM 12M","offer_id":41074190188638,"sku":"CV-P4512","price":177.4,"currency_code":"SGD","in_stock":false},{"title":"60MM 6M","offer_id":41074190221406,"sku":"CV-P6006","price":143.06,"currency_code":"SGD","in_stock":true},{"title":"60MM 9M","offer_id":41074190254174,"sku":"CV-P6009","price":188.84,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0087\/0150\/9683\/files\/phillo-pendulum-concrete-vibrator-poker-with-counter-spring-model-cv-p-concrete-vibrator-aiko-866692.jpg?v=1729066282","url":"https:\/\/aikchinhin.sg\/products\/phillo-pendulum-concrete-vibrator-poker-with-counter-spring-model-cv-p","provider":"Aik Chin Hin","version":"1.0","type":"link"}